Process: First, screen print the silicone, transfer glue and hot melt glue onto the high-temperature release film through a screen. Then, use a heat press machine to hot-stamp the pattern on the surface of the carrier such as cloth, with a thickness of 0.5mm-2mm.
Advantages: The silicone after transfer has good elasticity, strong three-dimensional sense, high-temperature washing resistance, simple process, convenient operation, environmental protection and beauty, no marks, good adhesion, etc.
Application areas: Suitable for clothing, gloves, swimwear, clothing pieces, ribbons, elastic bands, nylon bands, jacquard bands, cloth bands, shoelaces, woven labels, leather, etc.
Hot-stamping method:
Debugging heat press machine parameters: Set the temperature to 150 degrees and adjust the pressure to 4-5kg.
Place the clothing flat on the working surface of the heat press machine, and place the heat press film facing up and the glue side facing down in the corresponding position.
After pressing for 15 seconds on both sides, tear it open after cooling.