If you want to stick silicone labels on clothes, you can try the following steps:
1. Preparation
Make sure that the silicone label and the clothes are clean, dry, and free of dust or oil.
Prepare an appropriate amount of special silicone glue (such as KL-3636AB and other glue suitable for bonding fabrics and silicone).
2. Bonding steps
Gluing: Apply a thin layer of silicone glue evenly on the back of the silicone label. Be careful not to apply too much glue to avoid overflow and affect the appearance.
Standing: According to the requirements of the glue manual, let it stand for a while to let the glue dry slightly and enhance the viscosity.
Fitting: Stick the silicone label to the designated position of the clothes and press it gently to make it fit tightly with the clothes.
3. Curing treatment
Put the clothes with silicone labels in the oven and bake them at an appropriate temperature (such as 90°C) for a period of time (such as 10 minutes) to completely cure the glue. This step requires ensuring that the oven temperature and time are accurately controlled to avoid damage to the clothes.
If you don't have an oven, you can also use an iron to heat and cure. Place a thin cotton cloth on top of the silicone label and gently iron it with an iron for a while until the glue is completely cured. Be careful not to use too high a temperature to avoid scalding the clothes or the silicone label.
Fourth, check and adjust
After curing, check whether the silicone label is firmly attached to the clothes without loosening or falling off.
If you find that the edge is slightly raised, you can heat it again with an iron and gently press it to make it fit.
With the above steps, you can successfully stick the silicone label to the clothes.